Describe the Proper Use of an Eyewash Station

An eye wash station in a laboratory. The combination eye and face wash stations require 114 litres per minute 30 gallons per minute.

How To Use An Eyewash Station

Go Immediately to the Eyewash Station If a chemical splashes in your eyes time is of the essence.

. Get your eyes directly in the stream of the flushing fluid- Immediately. Immediately flush eyes for at least 15 minutes. Without delay make your way to the nearest eyewash station activate and flush eyes andor skin for a minimum of 15 minutes.

As the water flows over the workers eyes it will wash out any hazardous. Ad Shop Zoro to Get Fast Free Shipping on Orders of 50 and Hassle-Free Returns. This is to ensure proper function of the eyewash station and to flush out sediment buildup and stagnant water.

The station should be within 10 seconds travel time or 50 feet from where you use chemicals. It applies to workers as chemical workers. Only eyewash stations that are capable of providing a flow of clean potable water at a rate of 04 gallons per minute at 30 psi for 15 minutes are permitted.

In addition to this the occupants of lab or adjacent rooms if station is in a hallway should perform weekly testing of eyewash stations. The following steps outline the proper use of emergency eyewash stations. Hold eyelids open with the hands to fully irrigate the entire eye.

It is normal to close your eyes when something is in them but this will prevent water or solution from rinsing and washing the chemical out. A combination safety shower and eye wash unit should be used in situations where both the skin and eyes have been contaminated. Using an eye wash station during an emergency Hold eyelids open with thumb and index finger so you reach behind the eyelid.

If your eyes have been contaminated with an injurious substance you should thoroughly sluice them using an eyewash station. To use emergency eye wash. Flush the affected area of the body immediately for a minimum of 15 minutes.

Call Facilities Management at 858 534-2930 as soon as possible to collect water where drains are not installed. An eye wash is a unit that is used to irrigate and flush the eyes and does not cover the entire body. If chemicals in use can cause eye damage irritation or splash an eyewash stationFigure B4 is required.

Ideally one should flow the eyewash for one to three minutes. Eyewashes may be beneficial to those with sensitive eyes and can provide relief to the painful side effects of sensitivity. The eyewash should be within 10 seconds walking distance of chemical use locations although this distance may be less if doorways interfere with access.

For Agricultural WorkersThis video alone does not meet the annual training requirements under the Worker Protection Standard WPS. In the event of chemical self-contamination follow these steps. It covers the use of emergency eyewash and shower stations.

Get help walking to the eyewash station from a coworker. ANSI emergency eyewash safety standards are in place to help ensure that individuals receive the immediate treatment required after an eye injury for the best possible outcome. Laboratory users must be able to reach eyewash stations within ten seconds.

Eyewash stations should be designed to deliver fluid to both eyes simultaneously at a volume of not less than 15 litresminute 04 gallonsminute for 15 minutes. The dust covers will pop off and the flushing fluid will begin to flow out from the faucet heads. Push the lever- An ANSI compliant unit will activate with one single motion.

If the facility has determined that an eyewash station is needed that station needs to conform to ANSI Z3581-2014 which has the following specifications. The Correct Way To Use A Safety Shower In An Emergency. Have someone activate 911.

Choose from Millions of Items and Sign Up for Zmail to Get 10 Off Your First Order. A hand held drench hose is a combination of both and consists of a flexible hose connected to a water supply and used to flush the eyes face and body areas although not all at one time. Get to an eyewash station immediately.

Shout for help to allow co -workers to assist and call for medical assistance. Keep a clear pathway and ensure the stations frequently inspected and ALWAYS accessible and clean. In the event a workers eyes are exposed to chemicals its imperative that he or she immediately flush out the chemical which is where an emergency eyewash station comes into play.

The worker will stand underneath the station while allowing the water to spray down onto his or her eyes. Employers who choose the proper eyewash fluid and delivery system can reduce the severity of an eye injury as well as the direct and indirect costs associated with them. GO immediately to the eyewash station which should be located within 10 seconds walking distance from you if you work with caustic chemicals.

It can be used as part of. Eyewash is a fluid commonly salineus used to physically wash the eyes in the case that they may be contaminated by foreign materials or substances. Push the Lever to Activate the Unit.

Keep the eyes open and rotate the eyeballs in all directions to remove contamination from around the eyes.

User Guide How To Use An Emergency Eye Wash Station Safety Eyewash

Eyewash Station Requirements Creative Safety Supply Blog

How To Refill Portable Eyewash Stations Expert Advice